Навигатор по блогам

Мини Конкурс Блогов

Конкурс «ЧМ по хоккею» - В этом году Москва и Санкт-Петербург принимают чемпионат мира по хоккею. Как вы оцениваете шансы нашей сборной? Болеете ли вы за наших? Успели ли вы забронировать места на стадионе?

Участвуют все новые записи с меткой «хоккей»
Конкурс завершился

How to increase the service life of stage equipment


The lifetime of the instrumentation is basically determined by the standard of the upkeep. the upkeep and repair of lighting instrumentation is comparatively difficult and trivial. Basically, daily routine testing, weekly periodic testing, monthly instrumentation maintenance and correct authorisation square measure essentially applied.


Half associate degree hour before the gap, all instrumentation is turned on for temperature preheating and every one instrumentation and wiring square measure tested. The temperature state implies that the lighting is slightly bright;


After preheating for quarter-hour, all instrumentation are going to be reset to zero, in order that the instrumentation will dissipate heat and therefore the cooling time isn't but fifteen minutes;


After cooling, you'll be able to formally enter the stage of music performance;


At the top of the show, once the guest leaves the hall, the lighting engineer ought to shut down all instrumentation and permit the instrumentation to dissipate heat for fifteen to twenty minutes, then seal or mask the instrumentation before the lighting engineer will leave.


If you are going to host an outdoor show, then you will definitely need to stage truss, RK stage manufacturer can provide you with stage equipment for various performances, such as portable stage, dance floor, portable stage background and so on.



Для того чтобы оставить комментарий авторизуйтесь или зарегистрируйтесь.